Skip to the main content
TradeForge
Menu

For tool and die makers

Websites for tool and die makers.

Not a builder with a blank page. A site for tool and die makers arrives with 6 services described, 4 credentials listed, 6 bookable job types and 5 customer questions answered. You change the name, the town and the prices.

Start for $1

$1 for the first month, then ten dollars a month. Card required. Cancel from your dashboard.

Before you change a word

This is what the page already says.

Every line below is the copy we ship for tool and die makers. Swap in your own business name and town and it is your site.

tradeforge.ca/s/gauge-tool-and-die
Gauge Tool & Die

Tool and die work built around the job, not a guess.

Qualified tool and die makers serving Milton, with the scope, safety plan and schedule written down before work starts.

Red Seal 430A Tool and Die MakerFully insuredWSIB coverageWritten scope of work

Gauge Tool & Die provides tool and die work for stampers, moulders, machine shops and production manufacturers. We plan the access and safety requirements first, keep the person approving the work informed, and hand over the records the job calls for when it is done.

Gauge Tool & Die is invented, and that number is a 555 line. Your site says your name.

Services

The work tool and die makers actually sell.

Written out properly, because a list of one-word services tells a homeowner nothing. Delete the ones you do not do and add the ones we missed.

Progressive dies

Build and debug stations for feeding, piercing, forming and cutoff with strip progression documented.

Die repair and maintenance

Correct wear, galling, chipped details and alignment before they become scrap across a full run.

Jigs and fixtures

Design and build repeatable workholding for machining, welding, inspection and assembly.

Punches and form tools

Machine, heat-treat and fit punches, buttons, pads and form details to the approved drawing.

Tryout and troubleshooting

Run the tool, read the part and correct feed, timing, shut height and forming conditions at the press.

Engineering changes

Modify existing tooling to a controlled revision while protecting every unaffected feature.

Credentials

The things a customer checks before they ring.

Listed near the top of the page instead of buried in an About tab. Fill in your numbers and delete anything you do not hold.

  • Red Seal 430A Tool and Die Maker

  • Fully insured

    Certificate of insurance available before work starts.

  • WSIB coverage in good standing

    Clearance certificate available for commercial and industrial sites.

  • Site-specific safety plan

    Hazards, lockout requirements and access are reviewed before the crew mobilizes.

On your booking calendar

The jobs people book you for.

These land in the calendar the day you publish. A customer picks one, picks a slot out of your real hours, and the request arrives with the address and what is wrong.

  • Progressive dies estimate
  • Die repair and maintenance estimate
  • Jigs and fixtures estimate
  • Punches and form tools estimate
  • Tryout and troubleshooting estimate
  • Engineering changes estimate

Layouts

Three that suit tool and die makers.

All ten carry the same tools — booking, photo quotes, galleries, reviews, licence details — and you set your own colours and fonts on any of them. These are the ones that tend to look right on this kind of work, drawn here as Gauge Tool & Die. Start with one, open its live demo first, or see all ten layouts.

tradeforge.ca/s/gauge-tool-and-die
412 Bronte St S, Milton ONOpen today 7am – 5pm
GTGauge Tool & DieTool & Die Maker · MiltonCall us today(905) 555-0137Request a quote

Tool and die work built
around the job, not a guess.

Qualified tool and die makers serving Milton, with the scope, safety plan and schedule written down before work…

Book a visit(905) 555-0137
Licence7A-11531
Insured$5M liability
Established2005

Classic

The conventional contractor website: utility bar, straight nav, a photo banner and a formal licences block. Looks like a company that has been around for years.

Start with this layoutSee the live demo
tradeforge.ca/s/gauge-tool-and-die
127 Barton St E, Milton ONOpen today 8am – 4pm
GTGauge Tool & DieServicesOur Work(905) 555-0137Book a visit
Est. 2005 · Licence 7A-11531

Tool and die work built
around the job, not a guess.

Qualified tool and die makers serving Milton, with the scope, safety plan and schedule written down before work…

★★★★★4.8 from 27 reviews
  • Red Seal 430A Tool…
  • Fully insured
  • 21 years in business
  • Insured $2M
Book a visit(905) 555-0137
Serving Milton and the surrounding area
LicensedRed Seal 430A Tool and…Insured$2,000,000 liabilityEstablishedIn business since 2005

Heritage

A settled, family-firm look — cream paper, serif headings and room for photographs.

Start with this layoutSee the live demo
tradeforge.ca/s/gauge-tool-and-die
Gauge Tool & DieTool & Die Maker · MiltonWorkServices(905) 555-0137
Tool & Die Maker · Milton

Tool and die work built
around the job, not a guess.

Qualified tool and die makers serving Milton, with the scope, safety plan and schedule written down before work…

  • Licence 7A-11531
  • $5M liability insurance
  • In business since 2005
★★★★★4.8 · 27Request a quoteCall now(905) 555-0137
CredentialRed Seal 430A Tool and…ResponseSame day where we canServingMilton and nearby

Studio

A practice monograph: a ruled column grid, photographs in disciplined plates, the licence and the record set as printed tables. For trades whose customers buy precision.

Start with this layoutSee the live demo

Questions

What people ask tool and die makers.

Answered on your site, so the same conversation does not happen on the phone six times a week. Edit any of them.

What work does a tool & die maker handle?

Our regular work includes Progressive dies, Die repair and maintenance, Jigs and fixtures, along with the related inspection, setup and repair needed to leave the job ready for service. Send the equipment, drawing or site details and we will tell you plainly whether it fits our scope.

What qualifications do you carry?

Red Seal 430A Tool and Die Maker is the trade-specific qualification we lead with. Insurance and WSIB documents are available before the job, and any permit, engineered drawing or manufacturer procedure the work requires is identified in the quote.

How do you quote the work?

We quote from the actual scope: drawings and measurements where they exist, equipment model and condition where they do not, access, shutdown time, materials and testing. Changes are written down before they become extras.

Can you work around an operating site?

Yes. For stampers, moulders, machine shops and production manufacturers, we plan access, lockout or isolation, lifts and hot-work controls before arrival. If the work needs a shutdown, the quote separates preparation from the outage window so the interruption stays as short as practical.

What should I send before the first visit?

A few wide photos, the address, the make and model of any equipment, the drawing or part file if there is one, and the date the work has to be ready. That is usually enough to assign the right person and avoid a wasted trip.

Not your trade?

ElectricianPlumberHVAC TechnicianGas FitterRooferDrywallerMasonCabinet MakerPainterLandscaperFlooring InstallerGeneral ContractorEV Charger InstallerHandymanWelderConcrete ContractorRefrigeration & AC MechanicSheet Metal WorkerGlazierInsulation ContractorAutomotive Service TechnicianAuto Body & Collision RepairSmall Engine TechnicianAppliance Repair TechnicianLocksmithArboristFraming CarpenterTile SetterPool & Hot Tub SpecialistSeptic System ContractorFence ContractorGarage Door TechnicianWindow & Door InstallerEavestrough & Gutter InstallerChimney Sweep & TechnicianAsphalt Paving ContractorCarpenterSolar InstallerSiding InstallerDeck BuilderWaterproofing ContractorExcavation ContractorJunk RemovalPressure WashingHome InspectorPest ControlRestoration ContractorKitchen & Bath RenovatorSecurity & Camera InstallerCountertop FabricatorDuct CleaningMoversMillwrightIndustrial MechanicIronworkerBoilermakerIndustrial DesignerCNC OperatorStonemasonIrrigation TechnicianRenewable Energy TechnicianHeavy Equipment MechanicMarine MechanicDiesel MechanicAuto Paint SpecialistElevator / Escalator MechanicConstruction WorkerGeneral Labourer

Other tool and die makers in your town are already findable.

Be the one who answers. $1 for the first month, then ten dollars a month — and your trade is already written, so you are filling in a form, not building a website.

Start for $1See every trade